Silicon Valley Chapter of F100 Elite

Click here to edit subtitle


A little about Vern's F1 Restoration Project

Posted on January 18, 2018 at 1:10 AM

First a little background- Every once in a while I would see an F1 pickup on theside of the road, in a driveway or parking lot and wondered if the owner would beinterested in selling. Sometimes I even left a note on their windshield with myphone number. I never got a call. Sometime back in 87 I had made a shortcutfrom Winchester over to Pollard on Hacienda and there it was, a ‘For Sale’ signon a genuine Ford F1. It was in reasonable shape, a little surface rust, notailgate, decent body overall and the price was right. It turned out that it was amid 1950 Ford F1, with an original flathead V8 (that actually ran) and a really lowgeared four speed transmission.

The bed was not bolted down so I had to do a little wrenching before I hit theroad. My wife Roi followed me to make sure I made the eight-mile trip home, itran pretty good but the ride had a lot to be desired. At around 45 it felt like thingswere about to come unglued. I had a plan to make the F1 presentable with anew paint job but I was advised that the little bit of surface rust may causeproblems down the line. I had recently started a new job and did not have a lot offree time to work on the restoration but I did use the truck to haul stuff from HomeDepot and take junk to the dump. Several years past without progress and Ieventually parked it out in the field next to the house. It still ran pretty good but Ihad purchased a new GMC truck in 94’ and the restoration project urgency fadedaway.

Fast-forward to 2011...there she was, still sitting where I parked her way back94’. The F1 had actually sunk into the mud and weeds had grown up around her,pitiful. One fine spring day my daughter said she wanted to do a cleanup aroundthe place and asked me what I wanted to do with the now rusty relic in the field.Well, I said, I’m going to restore it! Really, she said and went on to gently remindme that I was running out of time. And, of course, she was right. Thisconfrontation prompting me take a close look at what was now a pretty sad pieceof work. After poking around a bit I figured, what the hell, lets just do it.

With the help of a couple of friends we hooked a chain to the rear axel and pulledit out of the mud, power washed it, inside and out, and assessed the extent ofdeterioration. It was pretty bad, running boards were shot, all the bed wood hadrotted away, a lot of rust around the bottom of the cab and the ground wasactually visible through the rusted out floor. The fenders and hood were in prettygood shape, a little surface rust, minor work needed to bring them back. The cab,on the other hand, was not so good. At this point I decided to disassemble thebody from the chassis and sandblast all the metal surfaces to get rid of the rustaltogether.

Although I was often encouraged to scrap the whole thing and find a truck inbetter shape I felt that after all is considered I was committed to see this thingthrough. With help from my friends, I hauled the now bare metal body parts to Manual Calara, the owner of a body and paint shop in San Jose specializing inrestoration. This was in July of 2011. Because Manual had a number of projectsin front of me I figured I had about six months to get a chassis ready forreassembly. To bring the original chassis and running gear into the currentmillennium, however, would require significant coin and I wanted a later modelOHV V8, automatic transmission, power steering, power brakes and a bettersuspension in front. After looking at the cost of acquiring the new power plantand trany, beefing up the chassis and purchasing the aftermarket stuff I had anidea. I remember reading about guys putting their early model trucks on newertruck chassis. This would potentially provide better suspension, brakes, and asignificant upgrade in power. Furthermore, to minimize modification of the newchassis I looked to find a vehicle with the same or very close to the samewheelbase.

To make a long story short, I found that the Ford Explorer would fit the bill andwent searching for one that was in good shape and had a V8. I did find a reallygood one from a guy in Boulder Creek, made the deal, brought it home and,again, with help from a couple of friends and a neighbors’ lift, removed the body(nine bolts).

So, while the body was undergoing restoration we moved the Explorer chassisinto my shop and began to get it prepared for prime time. Although the engineand transmission were in good shape, the power steering rack had a leak andneeded replacement. While the engine and transmission were off the frame, myfriend and skilled mechanic John Freeman, my daughter Taylor and I teamed upto replace the water pump, painted the chassis, running gear and engine,wrapped all of the wiring and prepared everything for mounting the body. Whilethis work was going on I began to plan how we were going to mount the oldermodel truck body onto a late model truck chassis.

The original chassis is basically two parallel pieces of channel steel. The newerExplorer chassis turned out to be a real challenge. The frame was about threeinches wider and had twist and turns that did not readily accommodateattachment of the F1 body parts. The rear double-hump shock mount crossmember, for example, rose several inches above the frame. In order to avoidencroachment into the bed surface I needed to cut it out and replace it with astraight cross member.

In regard to the bodywork, I checked in periodically to see how it was going.Manual had to do a lot of patching and welding to repair the cab section. Theentire floor needed to be replaced and the driver side cowl area had been caved-in sometime before I bought the truck. The bed panels were restorable but thefront bed panel was pretty bad and needed to be replaced. As it stood, I neededto purchase a new tailgate, front bed panel, front grill, running boards and floorpanel.

The cab restoration was pretty much ready in March 2012 and, with the help ofmy friend John, the chassis was trailered over to the body shop to beginassembly of the now primed body parts. Mounting the cab required some metalfabrication work as well. I designed a channel shaped bracket to support the rearsection of the cab, two ‘L’ shaped brackets to support the front corners of the caband two double flange brackets to support the rear. Allan Borches, owner of alocal metal shop in San Jose used the drawings I prepared to fabricate of the cabmounting brackets. The forward and rear cab mounting brackets were positionedand welded directly to the outside surface of the frame. The trucks cab wasfinally bolted down onto the brackets using some of the rubber mounting padsfrom the Explorer. With cab in place, the rest of the body parts were assembledonto the chassis and made ready for a return to my shop at home.

While I had the truck back home we were able to complete the wiring, install anew floor mounted power brake unit, hook-up all of the gas and brake lines,transmission shift mechanism, install the new headers and get ready to start theengine. This is a fuel injected engine with sensors all over the place so it took alittle fiddling around to get it to fire but fire it did! The early Mustang shiftmechanism is mounted in a center console that I designed and my daughtermade from half-inch thick birch plywood. The console fit nicely between bucketseats that I had pulled out of my neighbor Jim’s older Explorer.

The now road worthy truck was delivered back to the body shop to prep for paint.I thought it was ready for paint when the primer was applied but I was wrong.There was a great deal more sanding and filling and sanding to get it ready forthe shiny yellow paint. All of the body parts were disassembled from the chassisexcept for the cab. While the painting process was going on all of the nowseparated body parts I went ahead and purchased the white oak wood kit for thetruck bed and all the hardware to mount it. My daughter stepped up to prep thewood to a glassy smooth finish, finally applying a glossy marine varnish. My nextproject was to purchase and mount a new rear bumper. Because the explorerframe was about three inches wider than the original I needed to design a specialbracket set to mount the bumper. This bracket resembled a large ‘T’ with a slightoffset to line up with the existing mounting holes in the bumper. I also designedand fabricated brackets for mounting the new front bumper.

I’m going to cut to the end here... Everybody pitched in to carefully reassemblethe body parts onto the chassis, mount the bumpers, taillights, seats, gas inputunit. My maiden voyage in July 2013 was down to Fred’s Wednesday get-together at Scott and El Comino. In the months that followed I had the upholsterydone, installed a stereo system and completed a number of tasks on a lengthyto-do list and drive. A number of people asked me ‘how much do you have in it?”I have been advised to not add up all those receipts, at least not for a while.


-Vern Solberg

Categories: None

Post a Comment


Oops, you forgot something.


The words you entered did not match the given text. Please try again.


Reply KhedNero
7:53 AM on December 10, 2020 
viagra online order is viagra a controlled substance viagra with depoxatine overnight shipping
Reply FgnsBeria
8:23 AM on December 11, 2020 
cialis 10mg best price for cialis 20 mg cialis no rx
Reply Fsfgviree
2:58 PM on December 11, 2020 
online viagra austalia viagra coupons buy viagra from usa
Reply Jgsvflupe
6:03 PM on December 12, 2020 
where to get viagra dizzy right after viagra viagra distributors
Reply FhsnBeria
6:59 AM on December 16, 2020 
viagra no prescription viagra 500mg viagra soft tabs overnight delivery
Reply FgvdBeria
7:05 AM on January 9, 2021 
canadian drug pharmacy online pharmacy without scripts my canadian pharmacy
Reply Lokuviree
7:09 AM on January 11, 2021 
discount pharmacy card legit online pharmacy on line pharmacy
Reply Jlloflupe
2:26 PM on January 11, 2021 
erectile dysfunction treatment rx pharmacy online best drugstore liquid eyeliner
Reply Jtmfviree
11:35 PM on January 11, 2021 
erection pills pharmacy in canada best ed pills
Reply FgnhBeria
11:41 AM on January 13, 2021 
how much generic viagra costs without insurance generic for viagra 150 mg viagra on line viagra viagra dealers in malaysia viagra superforce online generic viagra best price viagra online with paypal prescription no viagra australia viagra for sale in the uk viagra trial voucher viagra without a script dapoxetine used with viagra woman viagra canadianlab viagra
Reply Jvcxflupe
1:42 PM on January 15, 2021 
viagra viagra in australia buy viagra sydney buying viagra in shanghai pfizer viagra viagra minn best viagra online testimonials of viagra users viagra web sites buy viagra online buyu viagra online viagracialisevit viagra man walmart without prescription pharmacist slang for viagra brand viagra canadian pharmacies selling viagra
Reply NlbxBeria
3:34 AM on January 18, 2021 
free viagra voucher viagra $50 viagra vipps viagra generic 50 mg buy viagra online in japan how much is viagra in tuajuana with a prescription overnight united states viagra viagra, canada buy viagra onlinne before and after viagra viagra online melbourne buy viagra dublin lowest price viagra buy viagra in canada viagra no prescription
Reply FbdhBeria
12:19 PM on January 18, 2021 
use cialis promise coupon orlando fl cialis canada and paypal cialis 20mg usa
url= says...
best ed cialis pills
Reply KbctNero
2:21 PM on January 18, 2021 
generic cialis pay pal where to buy cialis in canada cialis online pharmacy
url= says...
online generic cialis
Reply Aqbvviree
6:45 PM on January 19, 2021 
viagra sample pack street value for viagra viagra sales aurtarlia
url= says...
viagra windsor canada
Reply Jvcbxflupe
1:28 PM on January 20, 2021 
cialis legal online viagra cialis combo cialis brand name without prescription
url= says...
buy cialis online
Reply Fmfvviree
9:07 PM on January 27, 2021 
cheap generic cialis in the us cialis 10 mg price cialis online
url= says...
cialis super active
Reply FhnhBeria
1:40 PM on January 28, 2021 
pharmacy prescription Asendin best online pharmacies canada
url= says...
Reply KuikAxops
1:11 PM on February 4, 2021 
viagra result video buy viagra in ireland viagra online order
Reply Fqhhviree
5:52 AM on February 8, 2021 
canada drug viagra professional online pharmacies canada