Silicon Valley Chapter of F100 Elite

Click here to edit subtitle


A little about Vern's F1 Restoration Project

Posted on January 18, 2018 at 1:10 AM

First a little background- Every once in a while I would see an F1 pickup on theside of the road, in a driveway or parking lot and wondered if the owner would beinterested in selling. Sometimes I even left a note on their windshield with myphone number. I never got a call. Sometime back in 87 I had made a shortcutfrom Winchester over to Pollard on Hacienda and there it was, a ‘For Sale’ signon a genuine Ford F1. It was in reasonable shape, a little surface rust, notailgate, decent body overall and the price was right. It turned out that it was amid 1950 Ford F1, with an original flathead V8 (that actually ran) and a really lowgeared four speed transmission.

The bed was not bolted down so I had to do a little wrenching before I hit theroad. My wife Roi followed me to make sure I made the eight-mile trip home, itran pretty good but the ride had a lot to be desired. At around 45 it felt like thingswere about to come unglued. I had a plan to make the F1 presentable with anew paint job but I was advised that the little bit of surface rust may causeproblems down the line. I had recently started a new job and did not have a lot offree time to work on the restoration but I did use the truck to haul stuff from HomeDepot and take junk to the dump. Several years past without progress and Ieventually parked it out in the field next to the house. It still ran pretty good but Ihad purchased a new GMC truck in 94’ and the restoration project urgency fadedaway.

Fast-forward to 2011...there she was, still sitting where I parked her way back94’. The F1 had actually sunk into the mud and weeds had grown up around her,pitiful. One fine spring day my daughter said she wanted to do a cleanup aroundthe place and asked me what I wanted to do with the now rusty relic in the field.Well, I said, I’m going to restore it! Really, she said and went on to gently remindme that I was running out of time. And, of course, she was right. Thisconfrontation prompting me take a close look at what was now a pretty sad pieceof work. After poking around a bit I figured, what the hell, lets just do it.

With the help of a couple of friends we hooked a chain to the rear axel and pulledit out of the mud, power washed it, inside and out, and assessed the extent ofdeterioration. It was pretty bad, running boards were shot, all the bed wood hadrotted away, a lot of rust around the bottom of the cab and the ground wasactually visible through the rusted out floor. The fenders and hood were in prettygood shape, a little surface rust, minor work needed to bring them back. The cab,on the other hand, was not so good. At this point I decided to disassemble thebody from the chassis and sandblast all the metal surfaces to get rid of the rustaltogether.

Although I was often encouraged to scrap the whole thing and find a truck inbetter shape I felt that after all is considered I was committed to see this thingthrough. With help from my friends, I hauled the now bare metal body parts to Manual Calara, the owner of a body and paint shop in San Jose specializing inrestoration. This was in July of 2011. Because Manual had a number of projectsin front of me I figured I had about six months to get a chassis ready forreassembly. To bring the original chassis and running gear into the currentmillennium, however, would require significant coin and I wanted a later modelOHV V8, automatic transmission, power steering, power brakes and a bettersuspension in front. After looking at the cost of acquiring the new power plantand trany, beefing up the chassis and purchasing the aftermarket stuff I had anidea. I remember reading about guys putting their early model trucks on newertruck chassis. This would potentially provide better suspension, brakes, and asignificant upgrade in power. Furthermore, to minimize modification of the newchassis I looked to find a vehicle with the same or very close to the samewheelbase.

To make a long story short, I found that the Ford Explorer would fit the bill andwent searching for one that was in good shape and had a V8. I did find a reallygood one from a guy in Boulder Creek, made the deal, brought it home and,again, with help from a couple of friends and a neighbors’ lift, removed the body(nine bolts).

So, while the body was undergoing restoration we moved the Explorer chassisinto my shop and began to get it prepared for prime time. Although the engineand transmission were in good shape, the power steering rack had a leak andneeded replacement. While the engine and transmission were off the frame, myfriend and skilled mechanic John Freeman, my daughter Taylor and I teamed upto replace the water pump, painted the chassis, running gear and engine,wrapped all of the wiring and prepared everything for mounting the body. Whilethis work was going on I began to plan how we were going to mount the oldermodel truck body onto a late model truck chassis.

The original chassis is basically two parallel pieces of channel steel. The newerExplorer chassis turned out to be a real challenge. The frame was about threeinches wider and had twist and turns that did not readily accommodateattachment of the F1 body parts. The rear double-hump shock mount crossmember, for example, rose several inches above the frame. In order to avoidencroachment into the bed surface I needed to cut it out and replace it with astraight cross member.

In regard to the bodywork, I checked in periodically to see how it was going.Manual had to do a lot of patching and welding to repair the cab section. Theentire floor needed to be replaced and the driver side cowl area had been caved-in sometime before I bought the truck. The bed panels were restorable but thefront bed panel was pretty bad and needed to be replaced. As it stood, I neededto purchase a new tailgate, front bed panel, front grill, running boards and floorpanel.

The cab restoration was pretty much ready in March 2012 and, with the help ofmy friend John, the chassis was trailered over to the body shop to beginassembly of the now primed body parts. Mounting the cab required some metalfabrication work as well. I designed a channel shaped bracket to support the rearsection of the cab, two ‘L’ shaped brackets to support the front corners of the caband two double flange brackets to support the rear. Allan Borches, owner of alocal metal shop in San Jose used the drawings I prepared to fabricate of the cabmounting brackets. The forward and rear cab mounting brackets were positionedand welded directly to the outside surface of the frame. The trucks cab wasfinally bolted down onto the brackets using some of the rubber mounting padsfrom the Explorer. With cab in place, the rest of the body parts were assembledonto the chassis and made ready for a return to my shop at home.

While I had the truck back home we were able to complete the wiring, install anew floor mounted power brake unit, hook-up all of the gas and brake lines,transmission shift mechanism, install the new headers and get ready to start theengine. This is a fuel injected engine with sensors all over the place so it took alittle fiddling around to get it to fire but fire it did! The early Mustang shiftmechanism is mounted in a center console that I designed and my daughtermade from half-inch thick birch plywood. The console fit nicely between bucketseats that I had pulled out of my neighbor Jim’s older Explorer.

The now road worthy truck was delivered back to the body shop to prep for paint.I thought it was ready for paint when the primer was applied but I was wrong.There was a great deal more sanding and filling and sanding to get it ready forthe shiny yellow paint. All of the body parts were disassembled from the chassisexcept for the cab. While the painting process was going on all of the nowseparated body parts I went ahead and purchased the white oak wood kit for thetruck bed and all the hardware to mount it. My daughter stepped up to prep thewood to a glassy smooth finish, finally applying a glossy marine varnish. My nextproject was to purchase and mount a new rear bumper. Because the explorerframe was about three inches wider than the original I needed to design a specialbracket set to mount the bumper. This bracket resembled a large ‘T’ with a slightoffset to line up with the existing mounting holes in the bumper. I also designedand fabricated brackets for mounting the new front bumper.

I’m going to cut to the end here... Everybody pitched in to carefully reassemblethe body parts onto the chassis, mount the bumpers, taillights, seats, gas inputunit. My maiden voyage in July 2013 was down to Fred’s Wednesday get-together at Scott and El Comino. In the months that followed I had the upholsterydone, installed a stereo system and completed a number of tasks on a lengthyto-do list and drive. A number of people asked me ‘how much do you have in it?”I have been advised to not add up all those receipts, at least not for a while.


-Vern Solberg

Categories: None

Post a Comment


Oops, you forgot something.


The words you entered did not match the given text. Please try again.


Reply KbbfAxops
4:00 PM on February 11, 2021 
what ingredients inside viagra cvs viagra
Reply Abcfzoomerymn
3:12 PM on February 12, 2021 
viagra strengths viagra copyright viagra to buy online
Reply Ahbzviree
9:22 PM on February 12, 2021 
emergency cash loans for unemployed students wells fargo payday loan application ace payday loans lancaster ca
Reply NbnhBeria
11:33 PM on February 15, 2021 
200 mg sildenafil viagra uk best price
Reply BrfgNero
10:58 AM on March 31, 2021 
url= says...
cialis medication
url= says...
prices of cialis
url= says...
other uses for viagra
url= says...
does homemade viagra work
url= says...
buying cialis without prescription
Reply Abdgviree
3:30 PM on April 23, 2021 
Prandin cvs online pharmacy
Reply Lrbsviree
12:00 AM on April 24, 2021 
buying levitra
url= says...
buy levitra cheap
levitra diabetes
Reply RfvbBeria
10:53 AM on April 26, 2021 
generic cialis in ireland
url= says...
buy generic cialis 5mg
cialis online
Reply Jbsdviree
9:54 AM on April 27, 2021 
price prescription drugs canadian prescriptions
Reply Lrbsviree
11:47 AM on May 1, 2021 
levitra pill image
url= says...
which is better viagra or cialis or levitra
levitra online bestellen ohne rezept
Reply Abdgviree
1:44 PM on May 1, 2021 
Reforge approved canadian pharmacies online
Reply RfvbBeria
1:37 PM on May 2, 2021 
discount cialis cialis vs viagra
Reply Gtnbflupe
1:41 PM on May 4, 2021 
best viagra best viagra
Reply RebfBeria
3:21 PM on May 7, 2021 
buy generic cialis
url= says...
cialis brand 20 mg
cialis overnight
Reply LbsoBeria
7:55 PM on May 7, 2021 
cialis viagra cocktail viagra c20 cialis
Reply Anooviree
12:30 AM on May 8, 2021 
viagra generic singapore what does pfizer viagra do
Reply LbsoBeria
7:40 AM on May 10, 2021 
cialis overnight indian cialis
Reply Fmrfviree
4:22 AM on May 13, 2021 
cheapest cialis from india best price on cialis
Reply RebfBeria
6:47 PM on May 14, 2021 
super strength cialis
url= says...
cheap cialis online
cialis no prescription
Reply Anooviree
7:18 PM on May 14, 2021 
viagra pfizer thailand viagra natural beto